Rebar Bar Boots
A SIMPLE YET ECONOMICAL METHOD OF SUPPORTING AND SPACING BAR
REINFORCEMENT WITHIN DRILLED SHAFTS AND OTHER GEOTECHNICAL
APPLICATIONS.
APPLICATIONS
Bridge Foundations
Building Foundations
Retaining Wall Foundations
Street Light Foundations
High Mast Foundations
Transmission Line Foundations
Sub-station Foundations
Tower Foundations
Machine Foundations
Slurry Walls
Sea Walls
ADVANTAGES
Saves time & money. BARBOOTTM is easily installed.
Indefinite shelflife and easily stored.
Lightweight, yet strong & durable and engineered with the
contractor in mind.
Made of high density plastic resistant to corrosion and chemicals
common to construction.
Provides an excellent system of support for placement of fabricated
rebar cages into drilled or excavated shafts.
Economical to use.
Fabricated rebar cages are properly positioned for concrete placement.
Universally adaptable to variable size bar diameters (one size fits
all).
Encapsulation of bar ends provides added corrosion protection.
Self-locking.
CONSTRUCTION BENEFITS
Insures that the bar reinforcement is properly spaced and supported
within the confines of the drilled shaft or excavation
Provides quality assurance for the contractor of the subcontractors
performance and at the same time providing quality assurance for the
engineer and owner of the contractors performance.
Increased job profitability because installation is easy and quick
requiring only unskilled labor. Skilled labor is released for other
more demanding
tasks.
Rapid attachment combined with low labor requirements result in project
cost savings. Since positioning is critical, spacing and support
devices are
essential. Bar reinforcement must be supported with devices spaced as
to
maintain the steel at the correct position during the construction
process and during concrete placement.
SAMPLE SPECIFICATION
The bar reinforcement shall be properly spaced and supported inside the
drilled shaft.
The reinforcing steel shall be supported and held securely in position
prior to and during concrete placement operations.
Spacers shall be non-corrosive support and positioning devices or an
approved
equal.
SUGGESTED BARBOOTTM PLACEMENT REQUIREMENTS
Equally space boots around bottom of cage. Use one BARBOOTTM per 1500
lbs. of steel cage weight. (Minimum of every other vertical bar.)
BARBOOTTM is currently available in Model BB711 for commercial projects
and Model BB711 FED for federal projects. Both provide three (3) inches
(or 75mm) of clearance support. BARBOOTTM is universally adaptable to:
#6 through #11 standard reinforcing bars and #19m through #36 metric
reinforcing bars.
Product
#
|
Packaging
|
50-300
each
|
350-1000
|
1000
+
|
BB711
|
50/Carton
|
$3.00 each
|
$2.95 each
|
$2.80 each
|
BB711-FED
|
50/Carton
|
$3.25 each
|
$3.15 each
|
$3.00 each
|
Rebar Accesories Main List
New Century NORTHWEST LLC
775 Vincent Street
Eugene, Oregon 97401
Phone: (541) 342-4500 Fax: (541) 485-5566
E-MAIL sales@ncnwest.com
HOME PAGE
